Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Compton
Roof repair in Compton most often comes down to one thing: sun-baked shingles and failed edge seams on 1940s-1960s stucco tract homes. You’ll typically pay $350 – $800 for a targeted repair like flashing or vent boot replacement, while a larger sun-damage shingle section runs $900 – $2,400 depending on square footage and decking condition. Our Roof Repair team works across all four Compton ZIP codes (90220, 90222, 90223, 90224), and we schedule estimates around your availability, not ours. Call (855) 597-2817 and we’ll get a materials-neutral inspector on your roof within days, not weeks.
Why Seacrest Roofing Is Compton’s Preferred Roof Repair Company
We’ve spent enough time on Compton roofs to know that a mid-century stucco ranch near Compton Boulevard fails differently than a 1970s apartment building off Rosecrans Avenue. The first leaks differently, and the fix isn’t the same. That’s why we send a diagnostic inspector first, not a sales rep with a replacement quote already written. Noel Chambers built Seacrest Roofing around a simple rule: diagnose the actual problem, then match the repair or material to the roof. Homeowners in Compton appreciate that we’ll tell them a $400 flashing repair is all they need when that’s the truth.
Our Compton customers also value that we stock and install across seven shingle manufacturers. You’re not going to hear us push one brand because we happen to have a trailer full of it. If your 1950s ranch needs a repair that blends with Owens Corning or IKO shingles already on the roof, we’ll match them. If a flat section over a carport needs a torch-down patch, we’ll spec it correctly for Compton’s sun exposure. One inspection, one honest recommendation, and a warranty that matches the work.
Styles & brands we work with






Flat Roof Repair in Compton
Flat Roof Repair in Compton usually targets the low-slope modified-bitumen or torch-down sections found on 1960s-70s apartment buildings and some ranch home additions. These roofs sit under direct South Bay sun for three hundred days a year, and what we see most is alligator cracking and seam separation where the membrane gets brittle. Water ponds in the low spots, works into hairline cracks, and the next winter rain finds the decking. In Compton, expect to pay $450 – $1,200 for a spot patch, $1,200 – $3,500 for a larger section overlay, and $180 – $400 if the problem is a failed drain boot or parapet flashing rather than the membrane itself.
Parapet and Edge Seam Repair
Compton apartment buildings from the 1960s and 70s nearly always have stucco parapets. The membrane runs up the parapet wall and terminates under a metal counterflashing that’s often original. After fifty years of UV exposure, the sealant at that termination dries out, cracks, and channels water directly behind the stucco. We strip the failed sealant, re-flash with hot-dip galvanized or stainless steel, and seal with marine-grade polyurethane. This is not a caulk-and-pray fix; it’s a structural seam repair that holds in salt air.
Ponding Water Correction
Sun damage on Compton flat roofs often creates low spots where water sits after a rain. Ponding accelerates membrane deterioration and finds every pinhole. Depending on the slope, we can sometimes correct drainage with a tapered patch or by re-flashing the drain. If the decking has rotted from years of standing water, we’ll replace that section before the new membrane goes down. A flat roof in Compton done right should shed water within 48 hours after a storm, not hold it for a week.
Shingle Roof Repair in Compton
Shingle Roof Repair in Compton almost always starts with sun fatigue, not storm damage. The mineral-surface composition shingles on these 1940s-1960s tract homes bake in the LA Basin sun until the granules wear off, the asphalt dries out, and the shingles crack and curl. Once the curl breaks the shingle’s seal, wind-driven rain gets under the tabs and into the underlayment. You’ll pay $350 – $700 for a small repair (a few shingles, a vent boot, or a pipe collar), $800 – $2,200 for a larger sun-damaged section, and $150 – $350 if the job is just replacing dried-out flashing at a valley or sidewall.
Sun-Brittle Shingle Replacement
On a Compton ranch with original or aged composition shingles, partial replacement is normal and smart. We remove the cracked and curling shingles, check the underlayment beneath for dry rot, and replace the section with a shingle that matches in brand and color when possible. Atlas and Tamko make solid mid-tier options for these older homes, and we can match the exposure line so the repair doesn’t look like a patch job. The key detail is nailing pattern: we use stainless steel fasteners on Compton repairs because the salt air has already shortened the life of the original galvanized nails.
Eave and Fascia Seam Work
Compton’s shallow eaves and tight lot lines don’t leave much room for roof overhang. When debris gets trapped against the stucco-to-fascia seam, it holds moisture and sun-baked debris right at the roof edge. On a 1950s stucco ranch near Compton Boulevard and Rosecrans Avenue, a winter atmospheric-river rain exposed failed flashing at exactly that seam. We removed the sun-brittle shingles, installed ice and water shield along the narrow eave gaps, replaced the drip edge with hot-dip galvanized steel, and sealed the stucco-to-fascia joint with marine-grade polyurethane. We also upgraded the fasteners to stainless because the original galvanized nails were already corroding from salt air. That’s the difference between patching shingles and fixing the actual roof.
Trusted Brands We Service in Compton
Seacrest Roofing is manufacturer-agnostic, which means we repair and replace across seven major shingle lines: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. For Compton homeowners, that matters because your existing roof already has a specific brand on it, and a mismatched repair shows. We keep Owens Corning, IKO, and Atlas materials in regular rotation for Compton jobs because those brands cover the budget and mid-tier options most common on mid-century tract homes. Whether you need a small shingle match or a section repair that qualifies for a manufacturer-backed warranty, we’ll show you every option that fits your roof and your budget.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Repair Problems We See in Compton Homes
- Sun-cracked flashing at the stucco-to-fascia seam. Decades of UV exposure dry out the original sealant, and the narrow eave gaps on Compton’s tight-lot tract homes trap debris right where water wants to enter.
- Corroded galvanized fasteners from salt air. Compton sits close enough to the coast that airborne salt settles on roofs and works into exposed nail heads, flashing, and valley metal, shortening fastener life by years.
- Brittle mineral-surface shingles on 1950s ranches. These shingles don’t blow off in storms; they crack, curl, and lose their seal, letting water under the tabs and into the decking, often without visible damage from the ground.
- Ponding and membrane cracking on apartment flat sections. The low-slope modified-bitumen and torch-down roofs on 1960s-70s Compton apartments alligator under sustained heat, and standing water finds every seam.
Pricing for Roof Repair in Compton, CA
Here’s what Compton homeowners can expect to pay. A minor repair like a vent boot or pipe collar replacement runs $350 – $500. Flashing repair at a valley or sidewall runs $400 – $800. A sun-damaged shingle section of 100 to 300 square feet runs $900 – $2,400, depending on decking condition and whether we need to replace underlayment. Flat roof patches run $450 – $1,200 for a localized repair and $1,200 – $3,500 for a larger overlay. The coastal-spec materials (stainless fasteners, hot-dip galvanized flashing, marine-grade sealant) add about 15-25% to a repair versus inland-spec, but the inland version fails within a decade in Compton’s salt air. Call (855) 597-2817 and we’ll quote the repair with line items, not a lump sum you can’t audit.
We Also Serve Cities Near Compton
Seacrest Roofing serves Roof Repair in Compton and the surrounding South Bay and Gateway Cities. We regularly work in East Rancho Dominguez, West Rancho Dominguez, Carson, and Gardena. If you’re just outside Compton proper, call us and we’ll confirm coverage for your street. The same materials-first approach applies everywhere, and our inspectors know the housing stock from Gardena to Carson nearly as well as they know Compton.
Serving Compton, CA — Our Local Coverage Area
We’re based in the Compton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Compton
Because Compton’s 1940s-1960s tract homes have shallow eaves and lots that run nearly to the property line. Debris gets trapped in the narrow gap between the roof edge and the stucco wall, holding moisture against the seam where the fascia meets the stucco. Sun dries out the original sealant over decades, and once that seal fails, water enters at the edge even when the shingles above are intact. Repair scopes here should always include cleaning and sealing that seam, not just patching shingles. Call (855) 597-2817 and we’ll inspect the entire roof edge, not just the visible damage.
Yes, and it’s easy to miss if you’re not looking for it. Compton sits close enough to the coast that airborne salt settles on roofs and works into exposed galvanized nail heads, valley metal, and flashing. Standard galvanized fasteners corrode years sooner than they would inland. We specify stainless steel fasteners and hot-dip galvanized or stainless flashing on Compton repairs for that reason. The coastal-spec hardware costs more upfront but outlasts the inland-spec version by a wide margin. Ask us to show you the corrosion on your existing fasteners during an inspection; seeing it makes the case better than we can.
The difference is materials, not technique. A coastal-spec repair uses stainless steel fasteners, hot-dip galvanized or stainless flashing, and marine-grade polyurethane sealant at every seam and penetration. An inland-spec repair uses standard galvanized nails and general-purpose sealant. The inland-spec repair costs 15-25% less upfront but fails within a decade in Compton’s salt air and sun. We quote coastal-spec as standard in Compton because we’re not interested in selling you a repair that needs redoing. Call (855) 597-2817 and we’ll show you both specs on the estimate so you can see the actual price difference.
We remove the cracked and curled shingles in the affected section, inspect the underlayment beneath for dry rot or water damage, replace the underlayment if needed, and install new shingles that match the existing brand and color as closely as possible. We use stainless nails and re-seal the edges properly. If the damage sits at the eave or a wall joint, we also repair the flashing and seal the stucco-to-fascia seam in the same visit. A partial repair like this runs $900 – $2,400 on a typical Compton ranch depending on the section size.
Yes. Flat and low-slope sections on 1960s-70s Compton apartment buildings take direct sun all day with no slope to shed heat or water. The membrane dries out, alligators, and cracks, and standing water forces its way into every pinhole. These roofs also have parapet terminations where the sealant fails after decades of UV exposure. The repair is typically a patch or overlay plus parapet re-flashing, and it should always be done with materials rated for sustained sun and salt air exposure. Call (855) 597-2817 for an exact quote on your building’s flat sections, and estimates are free.
Written by Noel Chambers, Owner at Seacrest Roofing, serving Compton and the surrounding South Bay since day one.