Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Culver City
Roof repair in Culver City runs about $350 to $1,400 for most residential fixes, with leak repairs on historic clay tile homes landing between $900 and $2,800 when underlayment replacement is involved. That range reflects what we actually see across 90230, 90231, 90232, and 90233. We’re Seacrest Roofing, and we’ve repaired hundreds of roofs across this city’s distinct mix of 1920s Spanish Colonial Revivals, bungalows, and mid-century infill. Call (855) 597-2817 and we’ll send a crew that knows exactly what your roof’s age, pitch, and material need before we ever put a ladder against the fascia.
Culver City is not West LA. The housing stock is older. The roof pitches are lower. The original clay tile is irreplaceable in character, and the underlayment beneath it is quietly failing. We plan our repairs around that reality, not around a generic California roof.
Why Seacrest Roofing Is Culver City’s Preferred Roof Repair Company
We stock and install shingles from seven manufacturers, including GAF, CertainTeed, and Owens Corning, which means our repair recommendations never get forced through a single brand’s catalog. When we tell a Carlson Park homeowner their clay tile underlayment needs replacement, the product we recommend is the one that fits the roof’s history and the homeowner’s budget, not whichever line our supplier happened to stock that month.
Our inspection process is material-neutral. We diagnose the actual failure first, then match the repair product to the roof. If your Culver Crest tile roof needs a small flashing repair, we won’t pitch you a full replacement. If your bungalow’s low-slope decking is too far gone to hold new roofing, we’ll tell you that before we quote a patch that would fail in two winters.
Led by Noel Chambers, our team handles inspection, repair, and replacement under one roof. No gap between whoever found the problem and whoever fixes it. You get one point of contact from the first assessment to the final walkaround.
Styles & brands we work with
Metal Roof Repair in Culver City
Metal roof repair in Culver City typically runs $475 to $1,650, with standing-seam panel replacement on modern infill homes near the Culver Steps or along Washington Boulevard landing at the higher end when concealed fasteners need re-engineering. Most of Culver City’s metal roofs are newer installations on mid-century remodels and modern additions, not the original 1920s stock, so our repairs focus on failed seam fastening, corroded panel edges near the coast, and improper flashing where metal meets tile transitions.
Standing-Seam and Panel-Style Repairs
We service standing-seam, corrugated, and flat-lock metal systems across Culver City’s newer builds and rooftop additions. The most common Culver City failure mode is oil-canning that goes structural: panels expand and contract through our hot days and cool coastal nights, loosening fasteners and creating capillary leaks at laps. We replace the compromised panel section, re-secure with compatible fasteners, and re-apply panel sealant rated for coastal UV exposure.
Metal-to-Tile Transitions
On homes where a metal-roofed addition meets an original clay tile or composition shingle roof, the transition flashing is the weak point. Culver City’s dry-season heating lets old transition flashing curl and pull away, then the first winter rain channels water straight under the metal. We rebuild those transitions with new reglet flashing and proper step count, which stops what looks like a tile-roof leak but is actually a metal-roof junction failure.
Commercial Roof Repair in Culver City
Commercial roof repair in Culver City runs $800 to $4,500 depending on the system and the damage extent, with built-up and modified-bitumen repairs on older low-rise offices near Hayden Tract or Washington Corridor landing in the $1,200 to $3,800 range for a typical leak response with full membrane patching. Culver City’s commercial mix includes 1940s and 1950s low-slope buildings that have outlived their original roofing, plus newer TPO and PVC systems on creative-office conversions.
Low-Slope and Built-Up Systems
Older commercial buildings along Culver Boulevard and Jefferson Boulevard often sit under built-up roofs with gravel surfacing that hides blisters and alligator cracking. The failure shows up as a ceiling stain in a tenant’s space after the first real rain following a dry stretch, the same silent delamination pattern we see in Culver City residential roofs. We cut out the failed membrane section, patch the base and cap sheet layers, and re-flash penetrations rather than quoting a full roof the building might not need for another five years.
TPO and PVC Repairs
Newer commercial stock in Culver City, including parts of the arts district around La Cienega and the redeveloped Helms Bakery area, commonly uses TPO or PVC membrane. Repairs here usually involve failed heat-welded seams, punctures from rooftop HVAC maintenance, or compromised penetration boots. We match the membrane manufacturer, seam-weld the patch to factory spec, and document the repair for warranty registration where the property owner qualifies.
Trusted Brands We Service in Culver City
We’re not a single-brand dealer. Seacrest Roofing carries and installs GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, which means your repair gets matched to the shingle or tile system already on your roof, not re-engineered around whatever one manufacturer’s rep happens to push. For Culver City homeowners, that’s the difference between a patch that blends and a patch that stands out. We stock local parts across our Downey yard for faster turnaround in the 90230s, and our manufacturer relationships mean we can pull warranty documentation for repairs that qualify under enhanced labor-and-material programs, no matter which brand is on your roof.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Repair Problems We See in Culver City Homes
- Silent underlayment failure beneath original clay tile in Carlson Park and Culver Crest. The tile looks fine from the street, but the felt below has turned to dust after eight decades of heat cycling. Leaks show up as ceiling stains only after the first winter rain, when homeowners assumed the roof had years left.
- Inadequate flashing at low-slope penetrations on 1920s to 1950s bungalows. The original roofers didn’t plan for coastal moisture events and long dry spells. Old galvanized flashing corrodes, pulls away from valleys and vent pipes, and water gets through invisibly until the decking softens.
- Undersized or damaged decking on older Culver City homes. Many original roofs sit on 1x skip sheathing, not plywood. A repair that doesn’t address the decking below fails prematurely because the new material never gets a proper fastening surface.
- Ponding water on flat and low-slope roofs near the western edge of the city. Closer to the 405 and the coastal layer, morning fog and cool air mean flat roofs dry slower. Ponding water that would evaporate in a day in Downey sits for four or five in Culver City, accelerating membrane breakdown.
Pricing for Roof Repair in Culver City, CA
Here’s what we honestly quote in Culver City, based on the repair work we do most often:
- Shingle replacement (isolated patch): $350 to $800
- Leak repair with underlayment replacement (tile or comp roof): $900 to $2,800
- Flashing repair (pipe boots, valleys, chimneys): $450 to $1,400
- Flat roof patch (single-ply or built-up, residential): $600 to $1,900
- Vent boot replacement: $350 to $700
- Commercial low-slope repair (membrane patch, flashing rebuild): $800 to $4,500
What moves the price in Culver City is your roof’s age and pitch, whether decking is still sound, and whether we need to remove and reset original clay tile. A simple vent boot swap on a shingle roof in Blair Hills runs about $350. A Carlson Park tile-roof underlayment job with tile reset runs two to three thousand because the work is slower and more careful. Our estimates are free, written line-item quotes, and we don’t change the price once we start unless you approve a change order in writing. Call (855) 597-2817 to schedule a free inspection and get an exact price for your roof.
We Also Serve Cities Near Culver City
Our crews cover the complete Westside corridor, including Ladera Heights, View Park-Windsor Hills, Lennox, and El Segundo, in addition to our full Roof Repair service area. If you’re in Culver City proper or any neighborhood along the 405 and La Cienega corridors, read more about Roof Repair in Culver City or call us directly. We know these streets. We know how the roofs behave here.
Serving Culver City, CA — Our Local Coverage Area
We’re based in the Culver City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Culver City
We remove the tiles by hand, stacking them in order so they go back in the same place they came from. The repair happens underneath: new underlayment, new valley flashing, new drip edge. Then the original tiles get reset. This is a slow, deliberate process, and it’s the only way to preserve a 1920s or 1930s roof’s historic character. Call (855) 597-2817 for an exact quote; our estimates are free.
Ceiling stains that appear after the first significant winter rain are the most telling sign: your tile looks fine, but the underlayment below has failed. Other indicators include loose or sliding tiles you can spot from the ground, damp spots on the attic sheathing, or white efflorescence on interior plaster below the roofline. We recently repaired a 1928 Spanish Colonial Revival in Carlson Park where the original clay tiles were intact but the underlayment had disintegrated, causing ceiling stains after the first winter rain. Our crew carefully removed and stacked the tiles, replaced the failed underlayment, added new drip edge and ice and water shield in the valleys, then reinstalled the tiles to preserve the historic look. If you’re seeing any of these signs, call (855) 597-2817 and we’ll tell you whether repair is the right call.
Most repair work, like shingle patches, flashing replacement, or vent boot swaps, doesn’t require a permit in Culver City. But if your repair exposes decking or framing that needs replacement, or if the scope crosses into structural territory, the city’s building department may require a permit and inspection. That adds typically $300 to $800 to the job and extends the timeline by a week or two. We pull permits when they’re required and handle the inspection scheduling. Call (855) 597-2817 for a repair quote that accounts for any permitting your roof needs.
A square is 100 square feet of roof area, the unit roofers use to price materials and labor. When you compare quotes from multiple Culver City contractors, make sure each one is quoting the same number of squares for the same repair scope. A quote that’s 20% lower often assumes fewer squares, or doesn’t include waste factor on tile roofs where breakage during reinstallation is real. Our line-item quotes always list the square count so you can compare honestly. Call (855) 597-2817 for a free written estimate.
Yes, we repair metal roofs across Culver City, from standing-seam panels on modern additions near the Culver Steps to older corrugated systems on mid-century commercial buildings along Washington Boulevard. The most common issues are failed seam fasteners from daily heat expansion, corrosion at panel edges where coastal moisture lingers, and transition flashing failures where metal meets tile or composition roofing. Repairs typically run $475 to $1,650. Call (855) 597-2817 and we’ll assess what your metal roof needs.
Written by Noel Chambers, Owner at Seacrest Roofing, serving Culver City and the surrounding Westside communities.